Avanti CK30-1, Инструкция по эксплуатации

Страница: 15 / 32

15
¾
MODE 1 FUNCTION (TEMPERATURE MODE)
•
Press the “Mode 1” area of the control panel, this will activate the cooking in temperature mode.
•
Once the system is in temperature mode the default temperature 340ºF (171ºC) will be shown in
the display. The MODE 1 indicator light will flash on and off while in this mode.
•
You can select the temperature to suit your cooking needs by pressing the UP / DOWN arrows.
You can select the cooking temperature from the following preset stages:
180º / 220º / 260º / 300º / 340º/ 380º / 420º / 460º
¾
MODE 2 FUNCTION (POWER MODE)
•
Press the “Mode 2” area of the control panel, this will activate the cooking in Power / Wattage
mode.
•
Once the system is in Power / Wattage mode the default power setting 1000 Watts will be shown
in the display. The MODE 2 indicator light will flash on and off while in this mode.
•
You can select the power / wattage output to suit your cooking needs by pressing the UP / DOWN
arrow. You can select the cooking Power / Wattage from the following preset stages:
60w / 200w / 400w / 600w / 800w / 1000w / 1200w / 1400w
¾
TIMER (SETUP)
•
The Induction Hotplate can be set to cook at a set temperature for a set time period using the
timer.
•
Simply press the TIMER area of the control panel to activate the timer set up function.
1. The TIMER indicator light will flash on and off while you are setting up the cooking time.
2. The Display will show 00:00
3. To set the cooking time in minutes (01 – 59 minutes) press the UP arrow
(The timer will increase in increments of 1 minute each time you press the UP arrow, to
increase by increments of 10 minutes, press and hold the UP arrow until the selected time is
shown in the display).
4. To set the cooking time in hours (01 – 12 hours) press the Down arrow (the timer will increase
in increments of 1 hour each time you press the DOWN arrow, press the DOWN arrow until
the selected time is shown in the display).
5. Once you have finished setting the cook time, the system will apply the setting 5 seconds
after the timer has been set and you have selected the appropriate cooking temperature.
6. During the Timed cooking cycle the display will intermittently show both the indicator light and
set temperature or power and the remaining cooking time.
7. At the end of the Timed cycle (cooking time selected) the unit will sound a beep and will
automatically shut off (Standby mode).
¾
TIMER OFF (CANCEL)
To cancel the previously set cooking time simply press the “Timer Off” button.
¾
COOKWARE TIPS
The physical characteristics of pots and pans influence the performance of any cooking systems.
Therefore, emphasis must be placed on the importance of using proper cookware.
•
Cookware made of high-grade steel 18/10, aluminum, glass, and or copper cannot be used with
any type of induction cooking device.
•
Only use cookware with a magnetic bottom. (Magnet must remain sticking to the bottom to ensure
an accurate heat transfer between the induction hotplate and your cookware).
•
Use cooking vessels with flat bottoms and tight fitting lids to conserve energy and shorten cooking
times.
•
Pan size should match the element size. A slightly larger pan covers the entire element and
prevents spillovers from contacting the heat surface and burning in. Using a smaller pan than the
element is a waste of energy.
•
To avoid spattering and to maximize efficiency, pan bottoms should be clean and dry before
coming in contact with the elements.
•
Wipe spills off the element with a damp cloth as soon as it cools to cut down on clean up time. Be