Avanti CK30-1, Инструкция по эксплуатации

Страница: 14 / 32

14
¾
Operating Your Induction Hotplate (CK30IH - ONLY)
1
、
MODE 1 (TEMPERATURE MODE) SELECTOR
2
、
TIMER SET UP SELECTOR
3
、
MODE 2 (POWER / WATTAGE MODE) SELECTOR
4
、
TIMER CANCEL SELECTOR
5
、
POWER ON / OFF SELECTOR
6
、
UP AND DOWN SETTING SELECTORS
7
、
TIMER ON INDICATOR LIGHT
8
、
MODE 1 INDICATOR LIGHT
9
、
DISPLAY WINDOW
10
、
MODE 2 INDICATOR LIGHT
OPERATING PROCEDURE
¾
USING THE INDUCTION HOTPLATE
TEMPERATURE / POWER SETTINGS:
POWER / UNIT SPECIFICATIONS
Rated Voltage 110-120 Volts – 60 Hz
Rated Power / Temperature Output 60 - 1400 Watts / 180ºF – 460ºF
Dimensions 320X380X60MM
Net Weight 7.25 LBS
¾
DISPLAY
Once you have plugged the induction hotplate in to the power outlet (supplied with your complete
kitchen) it will remain in “Standby” mode until you turn the unit on using the ON / OFF button.
REMINDER: You must place the included cooking pan (with food or water to be cooked) on
the unit before operating as the hotplate is equipped with a cookware detection system that
will not allow the unit to heat up unless it detects an induction compatible cookware on the
cooktop. (DO NOT HEAT AN EMPTY PAN AS THIS WILL DAMAGE THE COOKTOP) If the
system does not detect a compatible cookware the message “E1” will display and the unit will
automatically power OFF.
By lightly touching the ON / OFF area of the touch panel the unit will be in “Operating” mode, you will
notice that the display will show ( - - - - ) advising you that the system is active and has detected the
correct type of cookware and will operate normally (See Mode 1 and Mode 2).