- 6 -
User Manual
Glass Canopy Assembly
1) Install the 3 plastic channels along the sides and front of the cabinet using the
Phillips screws and white washers.
A short channel should be installed on each side, and the long channel should be installed on the front.
INCLUDED HARDWARE
• (1) 360BARFRNT front rail
• (2) 360BARSIDE side rail
• (4) 360PLATE metal plate for side rails
• (8) 360CORNER L-shaped bracket
• (11) 360SCREW small screws for rails
• (20) 360GLSSCREW large screw for glass panels
2) Insert the side glass panel into the side channel. Attach a metal plate to the cabinet
at both ends of the channel, using the Phillips screws and white washers.
Then, attach each of the metal plates to the side glass panel using the socket head
screws, white washers, metal washers, and associated metal fasteners.
Repeat this step on the other side of the cabinet.
