- 3 -
User Manual
Transportation and Installation
Please read this manual thoroughly prior to equipment set-up, operation and maintenance.
• To prevent compressor or system damage, do not transport the unit on an incline of more than 45
degrees.
• Do not use the condenser, lid, or hinges as loading or unloading points.
• Before use, remove all packing material.
• Ensure the freezer is placed on a stable surface to avoid vibration and noise.
• Install the freezer in a well ventilated area with 4” clearance between the surrounding walls and the
cabinet wall for proper air circulation.
• The freezer should be installed in a dry place. Do not use it in direct sunlight.
Cautions
• In the event of damage to the electric wires or plug, please contact the after-sales service. Do not
attempt to repair it yourself.
• If the voltage is unstable, please choose the suitable automatic voltage regulator.
• The temperature control may need to be adjusted based on the amount of food in the freezer and the
ambient room temperature. More food or a higher room temperature may require a lower temperature
setting (higher number).
• Before placing food into the freezer, adjust the temperature control to the lowest point (highest number)
and let it run for several hours. Put the food in, and after 12 hours adjust the temperature control to the
normal point.
• Never put hot food directly in the freezer. Food should be cold or frozen before placing it inside.
• Do not fill the freezer full of product. For best results, meats and other large items should be divided into
smaller parts, and you should leave space between items so cold air can properly circulate and maintain
safe temperatures.
• If power is cut off, wait at least 5 minutes before turning on again to avoid damage to the compressor
• Non-packaged foods should be packed in plastic bags for proper safety.
• Never store flammable, explosive, or corrosive products in the freezer, and keep the freezer away from
such materials.
