AVANT A36795, Руководство оператора для насадки

Страница: 7 / 30

7 (30)
3. Safety instructions for using the attachment
Please bear in mind that safety is the result of several factors. The loader-attachment combination is highly
powerful and improper or careless use or maintenance may cause serious personal injury or property
damage. Due to this, all operators must carefully familiarise themselves about correct use and the operator's
manuals of both the loader and the attachment before starting operation. Do not use the attachment if you
have not completely familiarised yourself with its operation and the related hazards.
WARNING: Misuse, careless use, or using an attachment that is in poor condition,
may cause risk of serious injuries. Familiarise yourself with the controls of the
loader, correct coupling procedure, and the correct way to operate the attachment at
a safe area. Study especially how to stop the equipment in a safe manner. Read all
safety precautions carefully.
Read all safety instructions carefully before handling the attachment

When attaching an attachment to the loader, ensure that the locking pins of the
loader's quick attach plate are in the lower position and that they have locked
the attachment to the loader.
Never lift or move an unlocked attachment.

The Snow plow is designed to be used by one operator at a time. Do not let others
near the danger area of the equipment when it is in use.

Always transport the attachment as low as possible to keep the centre of gravity low,
and keep the telescopic boom retracted during driving.

Do not drive at high speed unless you can be sure that there are no obstacles at the
working area. The loader may stop suddenly if it hits an obstacle, regardless of the
spring release mechanism. Remember that there may be hidden obstructions or
fragile surfaces under the snow.

Operate only at well lit areas. Make sure that all lights of the loader are in good
condition, clean, and adjusted correctly. Extra work lights are recommended for the
loader when operating during dark. Mark any obstacle at the work area before
plowing to avoid collisions.

Lower the attachment firmly on the ground before leaving the driver’s seat. Make
sure that the attachment is properly supported during any maintenance or
inspections. Do not leave the driver’s seat when the loader boom is lifted. Going
under a raised attachment or loader boom is dangerous, as the boom may lower due
to loss of stability, mechanical fault or when other person operates the controls of the
loader.

Be sure not to tilt the attachment too far up to prevent it from tilting over the tipping
point of the hinged, floating coupling system.

Be sure not to tilt the plow towards the loader when lifted to prevent it from hitting the
loader boom. The plow can slide towards the loader boom because of its floating
quick coupling bracket.

Always transport the plow as low and as close to the machine as possible to keep the
centre of gravity low. Operate the controls of the loader slowly and in calm manner
especially during plowing.

Shut down the loader and place the attachment to a safe position as shown in Safe
stopping procedure before any cleaning, maintenance, or adjustments.