AVANT A36795, Руководство оператора для насадки

Страница: 21 / 30

21 (30)
.

When the electric switch is in 0-position, the auxiliary hydraulics control lever of the loader controls the
right blade section of the plow independently:
Or

When the electric switch is in 1-position, the auxiliary hydraulics control lever of the loader controls the
whole plow.
Or
If the plow is set to the position shown
in adjacent figure, it may be possible
to operate the right section only.
When the right section reaches its full
front position, the left section will
begin to turn towards the loader
regardless of the position of the
electric switch. This makes it easy to
set the plow into straight operating
mode.
If the electric harness is not connected, only the right blade section can be controlled.
See page
15 for instructions about the electric connection.