AVANT A36123, Руководство оператора для насадки

Страница: 20 / 22

20 (22)
7.2 Cleaning the attachment
Clean the attachment regularly to prevent accumulation of dirt which is more difficult to remove. You may use
a pressure washer and a mild detergent. Do not use strong solvents, and do not spray directly at the hydraulic
components, or at the labels on the attachment.
Do not store the attachment directly against the ground; place it on blocks of wood or on a pallet, for example.
For longer storage periods touch up the paint where needed, grease the lubrication points and oil the visible
parts of the hydraulic cylinder shaft to prevent rust damage.
. ..
8. Warranty terms
Avant Tecno Oy grants a warranty of one year (12 months) from the date of purchase for the attachment it
manufactures.
The warranty covers repair costs as follows:

Work costs are covered, if the repair is not performed at the factory.

The factory replaces any defective components or consumables.
The factory may reimburse the price of components purchased by the customer in special cases that have
been agreed in advance.
The warranty does not cover:

Normal maintenance work or parts and consumables required for it.

Damages caused by unusual operating conditions or ways of use, negligence, structural changes made
without the consent of Avant Tecno Oy, use of non-original parts or lack of maintenance.

Consequences of a defect, such as interruption of work or other possible additional damages.

Travel and/or freight costs caused by the repair.