AVANT 500 Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 40

AVANT 500 Series Скачать руководство пользователя страница 5

5

500 Series

Safety instructions

Handling of heavy loads

Never take a heavy load on the loader from
high level – e.g. from truck, shelf etc. – risk of
tipping over!

Always put the load down on the ground
before leaving the machine. When loading,
always keep the loader chassis as straight as
possible.

Personal safety and protective equipment

Wear safe clothing and personal protective equipment
(PPE). Protect yourself against work hazards like noise,
ejecting debris or dust for example.

• Noise level at driver’s seat can exceed

85 dB(A). Wear hearing protection when
working with the loader.

•

It is recommended to wear safety
footwear when working with the loader.

• Wear protective gloves when handling

hydraulic hoses.

• Follow regulations regarding protective

equipment. Wear eye protection and
hard hat or other protective equipment
as needed.

Read Operators Manual of the attachment for more
information about protective equipment needed in the
work.

Safety frame (ROPS) and safety canopy (FOPS)

Safety frame (ROPS) protects the operator
in case the machine tips over. Always fasten
the seat belt in order to stay inside the safety
frame protective area.
The loader is also equipped with a falling
objects protective canopy (FOPS). Never
take off the safety structures, modify them,
or attempt to repair. If damaged, contact
service.

Electric system and handling the battery

Lead acid batteries can produce flammable and explosive
gases. Make sure that the ventilation is sufficient and keep
arcs, sparks, flames and lighted tobacco away from battery.
• Battery contains corrosive sulfuric acid.
• Avoid contact with skin or clothes. If electrolyte
  gets on your skin or clothes, flush with a lot of water.
• In case of contact with eyes, flush with a lot of water
  for at least 15 minutes and consult a doctor immediately.
• Never charge a frozen battery.
• In order to avoid spark emissions always disconnect
  the negative (-) cable first and connect it last.
• Before connecting the battery cables make sure
  that the polarity is correct: faulty connection will
  seriously damage the electric system of the engine.
• Disconnect the battery before working on the engine or

equipment.

• Read the instructions for jump start on page 33.

«
...
3
4
5
6
7
...
»

Содержание 500 Series









































Отзывы:

Нет отзывов