Notice
If the previous shutdown is automatic resulting from termination of
battery discharge because of AC mains failure, the automatic
turn-on function (this function is settable through background
monitoring software and had been set at factory ) will be activated in
the event of AC mains restoration.
2. When the system begins to operate stably, gradually add loads to
the system. When adding loads, it can be observed that the shining
load indicators on the front panel increases, as shown in Fig. 10(a)
and Fig. 10(b):
FAULT
LINE
BATTERY
BYPASS
INVERT
BATTERY
LOAD
Fig. 10(a) LED Display of 1kVA UPS with Heavy Load
Chapter 3 Operation 25
E1-20010915-C-1.0
