HIGH
LOW
OFF
PULSE
928BX2000T
Toggle Controls
OPERATION
INSTRUCTIONS
2.
1.
Ensure the blender is in the off position
and place the container on the blender
base. Make sure the blender is fully seated
so that the drive coupling is in contact
with the container and the base.
Plug the blender into a 120V outlet.
2.
Put the ingredients into the container and
place the lid on. Push the lid down as far
as it can go on to the container.
3.
Speed Settings:
This blender has 2 speed
settings- High and Low. Use the toggle
switch to select the desired speed and the
blender will begin working. Use the High
option to crush ice quickly.
4.
Pulse:
This blender is also equipped with
a pulse feature, which is engaged by
holding down the “Pulse” button. The
blender will run on high speed until the
button is released. It will then return to
the current speed setting.
5.
Always allow the motor to stop
completely before adding or removing the
container from the base. Not following
this warning could cause damage to the
blender which may void the warranty if
it is deemed misuse is the cause of the
malfunctions.
6.
Do not operate the blender without a lid.
7.
Always hold the blender container
with one hand by the top of the lid to
ensure the container remains secure
atop the base.
8.
Wash and dry the container after
each use.
