PULSE
SPEED
TIME
4.
928BX2100E
Digital Controls
1.
Ensure the blender is in the off position
and place the container on the blender
base. Make sure the blender is fully
seated so that the drive coupling is in
contact with the container and
the base. Plug the blender into a
120V outlet.
2.
Put the ingredients into the container
and place the lid on. Push the lid down
as far as it can go on to the container.
3.
This blender has digital controls that
feature an adjustable timer, 3 speeds,
pulse, and one touch start.
4.
You can blend using either the timer and
a speed selection, or just choose a speed
setting. If blending by time, use the up
and down arrows to set the time, which
can be seen on the LCD display.
5.
Speed Settings: Select your speed from
the 3 settings:
1: 15,000 RPM
2: 20,000 RPM
3: 30,000 RPM
6. Pulse:
This blender is also equipped with
a pulse feature, which is engaged by
holding down the “Pulse” button. The
blender will run on high speed until the
button is released. It will then return to
the current speed setting.
7. One Touch Start:
This feature allows you
to use the most recent blending settings
without having to re-program them.
Once you’ve secured the container back
on the blender base, simply press the start
button and the unit will activate using the
most recent time and speed settings.
8. Timer:
Time can be set in increments of
30 seconds up to 15 minutes.
9.
Always allow the motor to stop
completely before adding or removing
the container from the base. Not
following this warning could cause
damage to the blender which may void
the warranty if it is deemed misuse is
the cause for the malfunctions.
10.
Do not operate the blender
without a lid.
11.
Always hold the blender container
with one hand by the top of the lid
to ensure the container remains
secure atop the base.
12.
Wash and dry the container after
each use.
OPERATION
INSTRUCTIONS
