AW58100HTA, HTS
User’s Manual
PAGE 4
Technical Support
(650) 384-0000
www.avalanwireless.com
Step 4. Browse to the Access Point’s interface: Enter http://192.168.88.12 into your
web browser’s address bar. If you are successful, you will see a login screen like this.
If not, the browser will time out and you will need to double check the IP addresses
and subnet masks.
Step 5. Log In to the Access Point: The default login name is “admin” and the pass-
word is “password.” If your login is successful, you should see the “Quick Set” page
similar to this:
(You may need to scroll around in the page to see all the elements, particularly if
you have a lower resolution monitor or are using Firefox as your browser.)
If the two radios are communicating, you will see a line in the Wireless Clients sec-
tion with the MAC address of the Subscriber Unit. The Signal Strength box will indi-
cate whether the receivers are being overloaded. Re-position antennas if necessary
to bring the signal strength below -30 dBm.
Utilizing state of the art MIMO technology, the AW58100HTA/S achieves very high data
rates through a combination of dual spacial streams and higher level OFDM modu-
lation. The default RF configuration provides a 20 MHz channel bandwidth with 5
selectable non-overlapping channels to choose from. When configured and mounted
with HTS antennas aimed toward the HTA, the radios operate as a wireless virtual
LAN network.
click
