background image

 

 

LED display: 

 
The AW-900x Mate has a 16 LED display to display the status of the device. These LEDs 
can be viewed by removing the cover. 

Name 

Function 

Color 

Power 

Unit has power and has successfully booted. 

Red 

RF Link 

The radio has successfully synchronized with it 
partner. 

Green 

RF TX 

Radio transmission is occurring. 

Green 

RF RX 

Radio reception is occurring. 

Green 

Eth Link 

The Ethernet Port has a valid Ethernet connection 

Green 

Activity 

The AW900m is processing data  

Green 

1 (channel) 
2 (channel) 
4 (channel) 
8 (channel) 

By adding the numbers that are lit the user can 

determine the current radio channel. 

        1 903.12500 MHz     7   915.62500 MHz 

        2 905.20833 MHz     8   917.70833 MHz 
        3 907.29167 MHz     9   919.79167 MHz 
        4 909.37500 MHz     10 921.87500 MHz 
        5 911.45833 MHz     11 923.95833 MHz 
        6 913.54167 MHz     12 926.04167 MHz

 

Green 

Excellent link quality –  

 

Green 

Very good link quality – 
 

Green 

Good link quality – 
 

Amber 

Fair link quality – 
 

Amber 

Poor link quality – 
 

Red 

Link Quality 

Meter 
 
 
The more LEDs that 
are lit the higher the 
link quality. 

No link quality - 

 

Red 

 
Troubleshooting:

  

See the online installation tutorial and FAQ at 

www.avalanwireless.com

 

 

No Power LED: 

Check the power connections. 

No Radio Link LED:

  

The radio is looking for its matched partner. If both units are powered up and the 

Power LEDs are active they may be too far away to create the radio connection. Try 
other locations that may have a less obstructed path or try to reorient the antennas.  

Yagi type 

antennas get their best range when they are oriented to point directly at 

each other with the antenna elements oriented in the same plane (eg. vertically or 

horizontally) 

Radio LINK LED ON but Link Quality Indicator is low: 

The units may be too far away to create a good radio connection. Try other locations 
that may have a less obstructed path or try to reorient the antennas.  

No Ethernet LINK LED: 
 

Check your network connections. 

 
Installing Multiple systems in close proximity: 

See the online installation tutorial and FAQ at 

www.avalanwireless.com

 

 

 

Support Email:

 

[email protected]

 

 

      

Support helpline:

 

(650) 384-0000

 

Содержание AW-D900







Отзывы: