Initial Setup:
Camera:
1.
Setup your network camera while attached to a network. Please refer to the
manufacturer’s instructions provided by the camera.
2.
Ensure the video from the camera can be viewed on a networked PC.
3.
To optimize the camera for use over a wireless link please see camera
performance FAQ at
www.avalanwireless.com/support
.
Dome:
1.
Install the Videolarm FDW75C2N/AW-D900 dome housing using the supplied 120VAC
to 24VAC transformers. Please contact Videolarm for installation support on the
dome housing.
www.videolarm.com
1-800-554-1124.
2.
Mount the network camera within the dome housing according to Videolarm’s
instructions.
3.
Attach antenna to the dome.
Wireless Setup:
1.
Install in the AW-900x.
2.
Attach the antenna to the AW-900x (see Appendix A for polarization guide, page 6)
3.
Attach the white power injector to the end of the Ethernet Cable
4.
Attach the 120VAC to 9VDC power supply to the white power injector.
5.
Connect an Ethernet cable from the injector to the network (or directly to a PC).
6.
The AvaLAN radios automatically select the best radio channel, encrypt the
Ethernet data and transports the data wirelessly to its mate.
7.
Use an internet browser on a networked PC to view the video from the camera.
Ensure that the subnet/IP addresses of the PC and the camera are compatible.
8.
For radio/network troubleshooting see page 3.
AW-900x Mate
Power
over
Ethernet
Injector
(Included)
Power supply
120VAC to 9VDC
(Included)
Ultra Long Range
Digital Ethernet
900 MHz Radio Link
Ethernet
RJ45 10BT
9-48VDC
24VAC
Power supply
2x 120VAC to 24VAC
(Included)
