Instructions and user manua
l
PANDuo pH Turboxy
NOT044ENV02
19
4.4.4
Overdosing alarm
The pump blocks its dosing and displays an alarm message when it has dosed more than the volume
indicated in the alarm menu for 4 consecutive hours. This alarm allows dynamic monitoring of any potential
overdosing
When the unit is in an alarm state, the following screen is displayed
4.4.5
Guide to the first setting's alarm
The base of these regulations was realized according to the usual chemicals for the water treatment of
swimming pools on the market and our experience (*).
Water volume m
3
Acid L/4H
Chlorine L/4H
1 - 5
0,1
0,3
6 - 10
0,2
0,6
11 - 20
0,3
1
21 - 40
0,8
1,5
41 - 80
0,8
2,5
81 - 120
1,0
4
121 - 150
1,5
5
(*)
This table is for information purposes and could not engage the responsibility of AVADYPOOL.
OVERDOSING ALARM
X.XX L/4h
Adjusting the overdose alarm (cf 4.4.5): above the
defined threshold, the pump enters a state of alarm
requires that the button be pressed
CAL/OK
to start
again. To disable the alarm, adjust the threshold to 0 L/h
(OFF).
In average, in a 100 m3 pool :
1L of acid drops the pH by 0.3 pH
1L of chlorine adds 1 ppm
If the threshold is set to
0.00 L/h (OFF), the alarm
is disabled.
Press
MENU/ESC
to exit.
ALARM NOT ACTIVE
48h
Possibility to disable the alarm for 24h
or 48h to simplify startup, for example.
OFF to enable the alarm without period.
*****
OVERDOSING ALARM
Simply press
CAL/OK
to cancel the
alarm.
Resume the settings of the Duo
pH Turboxy