Instructions and user manual ChloriProtect
NOT004ENV05
3
2.0 DESCRIPTION OF THE DEVICE
ChloriProtect allows to eliminate the excesses of chlorine in the water of the swimming pool. A redox probe
sends a signal giving the quantity of disinfectant in the water (display mV).
When the rate of disinfectant is sufficient (defined by default in 640 mV), ChloriProtect stops a salt
chlorinator. When the rate of disinfectant is insufficient, ChloriProtect starts a salt chlorinator.
2.1 Parts description
Here are the complete content of the package you received. All parts will be necessary for the proper
operation of your device.
A.
Shutter
B.
Buffer solution 475mV
C.
Rx electrode
D.
Probe holder
E.
Auxiliary plug
F.
Clamp DN50
G.
Screws and peg for wall mounting x2
Fig. 1
2.2
Buttons description
Fig. 2
1-
Press
SET
to see and adjust the setpoint
2-
Press
CAL
allows the calibration of the Redox to 475mV, associated to the
SET
button to change
the value of the set point.
3-
640mV value of the Redox in water.
4-
ON/OFF
button to turn on the device and maintain more than 3 seconds, and, keep pressed,
start manually the salt chlorinator.
1
2
3
1
4
