18
OPERATING INSTRUCTIONS
BEFORE USE:
1. Do not use this device during charging (fully
charged in 3-4 hours). It is normal that it cannot be
turned on while charging.
2. When the device is in no-output status, it will
automatically shut down if there is no further action
within 5 minutes.
HOW TO USE
1. Clean your skin before use. Use the pads on
clean and flat areas, no sweat and no oil.
2. Attach one pair or two pairs of the electrode
pads to the massager area, such as the shoulder
and leg.
Note: If the stickiness is not good enough after
a period of use, please try to add a few drops of
water on the pads and dry the pads naturally. It can
increase their longevity. Make sure both pads on
the skin do not overlap.
3. Connect a pair of electrode pads to one lead
wire, and the other end of the wire should be
connected to one of the two output ports of the
device. Similarly, the other pair of electrode pads
should be connected to the other output port of the
device through the remaining wire.
