background image

10

S

e

tu

p

11

S

e

tu

p

LED

 

„

On while charging the battery.

 

„

Off when in use and not charging.

 

„

Blinks when the TV is in standby mode.

 

„

Blinks when using the remote.

ANTENNA

Extend and adjust for 

best reception.

Joystick

 

„

Move up and down to adjust channels. 

 

„

Move left and right to adjust volume.

 

„

Navigate menu.

POWER

External 
antenna 
input

Headphones 
jack

AV IN

IR sensor

Receives remote 

information.

MENU

Access/exit the 

settings menu.

 

 

„

Confirm 

selections.

 

„

Display channel 

information

Powering Your TV

Using the AC Adapter

Connect the provided AC Adapter to the 

DC 

12V

 jack on the back of the TV, and then 

connect it to a standard household outlet.

Caution

 

„

The adapter’s center tip must be set to positive and its 

plug must fit the portable TV’s DC 12V jack. The supplied 

AC adapter meets these specifications. Using an adapter that was not included may not 

meet the TV’s specifications and could damage the TV or the adapter.

 

„

Do not leave the adapter plugged into the AC outlet or connected to the TV when you 

are not using it.

 

„

The adapter might become warm after extended periods of use.

 

„

Plug the adapter into an easily accessible outlet near the TV.

Using the Car Power Adapter

Connect the provided car power adapter to the 

DC 12V

 jack on the back of the TV, 

then connect it to the power port in your car.

Note: 

For your safety, start your car before you connect the car adapter.

DC 12V            Stand

MAIN 
POWER

Содержание Auvio 16-923




















Отзывы: