Preparing for Commissioning
Installation & Commissioning Handbook, User Guide, AutroSafe Interactive Fire Alarm System, P-BSL330/IE,
Autronica Fire and Security AS
Page 12
3.4 Entering Executive Mode
The BSL-330 module must be electronically configured before it can
be used. Configuration must be done via Port 1, which has to be set to
Executive Mode
.
•
To enter Executive Mode, press and hold down the green
Executive Mode button
on the front panel approximately 5 seconds
until the EXE indicator starts blinking, then release it.
A few seconds later (approximately 3-4 seconds), the red EXE
indicator will blink rapidly (1second ON / 1 second OFF), and you
can start the configuration program.
KD485
PROG
2TX
2RX
1TX
1RX
EXE
PWR
SYSTEMS
KD485
PROG
2TX
2RX
1TX
1RX
EXE
PWR
SYSTEMS
EXE indicator
Green Executive
Mode button
