The Modbus Interface Module
Installation & Commissioning Handbook, User Guide, AutroSafe Interactive Fire Alarm System, P-BSL330/IE,
Autronica Fire and Security AS
Page 9
2.4 Indicators & Buttons on the Front Panel
The BSL-330 module has the following indicators and buttons:
2.5 Dip-switches – Overview
For information on
Dip-switch Settings
, refer to 3.2.
KD485
PROG
2TX
2RX
1TX
1RX
EXE
PWR
SYSTEMS
Red LED - Send (TX) Port 2 (to external PLC equipment).
Blinking light (2 seconds intervals) indicates that signals are being sent.
Red LED - Receive (RX) Port 2 (to external PLC equipment).
Blinking light (2 seconds intervals) indicates that signals are being received.
Red LED - Send (TX) Port 1 (to EAU-321 – AutroSafe).
Blinking light (2 seconds intervals) indicates that signals are being sent.
Red LED - Receive (RX) Port 1 (to EAU-321 – AutroSafe).
Blinking light (2 seconds intervals) indicates that signals are being received.
Red LED – Executive Mode (when setting paramters)
Blinking light (1 second intervals) when green button has been pressed.
Yellow LED –
Steady light indicates Power ON.
Green Executive Mode button. Used to enter Executive Mode (when setting
parameters).
Grey rotary switch (default factory settings - 0).
4
ON
3
2
1
(front side)
(rear side)
Top View of BS-330 Module
4
ON
3
2
1
(front side)
(rear side)
Top View of BS-330 Module
