•
The display should now show the time of day and the amount of gallons
remaining. This display will switch between these valves about every 10 seconds.
Note that there is a “PM” light indicator to differentiate between AM and
PM times.
Initial Start-Up:
•
With one nearby softened faucet running in the COLD position, slowly open your
bypass valve or 3-valve bypass to about ¼ open to allow the air trapped in the
softener to escape via your running faucet. See page 6 in this guide for
illustrations.
NOTE: Opening the bypass too quickly or too fully open may
damage your softener or plumbing.
•
Allow the softener tank to slowly fill with water, and then gradually move your
bypass valve to the fully open position.
NOTE: You may see some initial
discoloration from the softened water – this is normal and should dissipate
within the first 40-50 gallons of water used.
•
Turn off the nearby faucet when the water runs clear.
•
Add approximately five gallons of water to your brine tank, and add 120-160
pounds of pellet, solar, or block salt or potassium chloride to your brine tank.
Enjoy Your Softener!
Congratulations, you have successfully installed your new water softener with Autotrol
LOGIX 255-760 Meter Valve!
Please maintain your system by keeping the softener plugged-in and always keep your
brine tank filled with salt to at least above the water level.
We appreciate your business, and hope that you enjoy years of trouble-free softened
water!
-
QualityWaterForLess.com
© 1999-2007 QualityWaterForLess.com
- 15 -
