18
If a missing white (passenger) FOB is registered, the audible alarm
and flashing LEDs will be energized upon entering alarm mode.
The RESET LED will be flashing red. (0.5sec on, 0.5sec off)
If the RESET button is pressed, the audible alarm will be turned off,
the missing FOB will be unregistered and surveillance will continue
of the remaining FOBs.
If the Power switch button is pressed (less than 2 s) during the
alarm state, it will be ignored. Reset button must be pushed first
before power switch button will respond.
The system is immediately re-armed and will trip in the appropriate
alarm mode again if a second FOB is lost.
BATTERY FAULT – Host or Fob
POWER LED blinks Red (for unit with bad battery), buzzer chirps
(1sec on, 0.5sec off)
Operation otherwise normal.
CHARGE & ACTUATOR (HARDWARE) FAULT
In Fault Condition, All LEDs blink Red, the buzzer chirps, the
capacitor charging is disabled and the unit waits to be shut off.
(2.5sec on 0.5sec off)
TEST MODE (LEDs, BUZZER, SOFTWARE) FAULTS
If the reset switch is held down for greater than 6 seconds and then
the power switch is held down for greater than 1 second, unit
enters test mode
o
In test mode, all LEDs will be amber, buzzer will be on for 1-2
seconds, then the unit will cause a software fault.
o
In software fault, after reset, buzzer chirps, the unit will reset
and try to re-acquire fobs.
