Power Input Connection
Fig. 2 Power Input Connections
Caution
First make +12V wire connection then the ground connection and finally the remote connection.
Furthermore the +12V wire must always be fused at the battery for protection against possible damage. If
you need to replace the power fuse, replace it with a fuse of the same value. Using a fuse of a different type
or rating may result in a serious hazard.
This amplifier has two types of signal input terminal. RCA connector for low input. Adjustment of input
levels is accomplished by the gain control of both channels. Adjusting this control allows the amplifier gain
to be controlled to match and balance both channels.
The RCA input connector should be used when connecting the radio/cassette line out and this connection is
usually made by using RCA-RCA connector wires. RED connector is used for RIGHT channel and
WHITE connector is used for LEFT channel.
