6
ENABLING ALARM VALET MODE
Start with Valet switch in OFF position.
1. Turn ignition ON and wait for two seconds
2. Slowly set the valet switch from OFF to ON. At this point the
LED turns and stays ON
to indicate
that the Alarm Valet Mode is enabled
3. Turn the ignition OFF then set Valet switch to OFF position.
DISABLING ALARM VALET MODE
Start with the Valet switch in the ON position.
1.
Turn ignition ON
2. Slowly set the alarm valet switch from ON to OFF. At this point the
LED turns and stays OFF
to
indicate that the Alarm Valet Mode is disabled.
3. Turn ignition OFF
ENABLING STARTER VALET MODE
1. Make sure you did set the alarm valet mode, as you require.
2. Set
the
valet switch ON
3. The remote starter is now disable.
DISABLING STARTER VALET MODE
1. Make sure you did set the alarm valet mode, as you require
2. Set
the
valet switch OFF
3. The remote starter is now in normal operation
LED FLASH RATE
LED RATE
DESCRIPTION
OFF -
The alarm system is
disarmed
and the
Alarm Valet Mode is disabled
. In
passive arming mode, the key switch should be in the ON position to prevent
arming if the user stays inside the vehicle.
ON -
The system is in
Valet Mode
. All alarm functions and the starter kill are
disabled. The remote starter function is still active, as well as remote door
locking/unlocking and trunk.
FLASHING
SLOWLY
The alarm system is armed.
FLASHING QUICKLY
In Passive Arming Mode, the system is in it’s 35 seconds exit delay before
arming
1 FLASH
INTERMIT.
ALARM MEMORY STATUS: There has been a power-up or a panic alarm.
Turning the key switch in the ignition position clears the alarm memory status
indication.
3 FLASHS
INTERMIT.
ALARM MEMORY STATUS: There has been a hood intrusion alarm. (With
Chirp delete ON)
4 FLASHS
INTERMIT.
ALARM MEMORY STATUS: There has been a door or hood intrusion
alarm or shock with Chirps ON or door or shock with Chirps OFF.
