Autostart AS-1260 Скачать руководство пользователя страница 2

 

2

WHAT’S INCLUDED 
 
Please review the installation guide before 
beginning the installation, particularly the 
wiring diagram and the list of programming 
options. 

Prior to installation please be sure that all 

components required to install the system is in the 
box. 
The following is a list of components included in 
the Kit: 
 

• 

1 – Control unit 

• 

1 – Transmitter (As per model) 

• 

1 - 5 Pin 14 AWG harness (Ignition harness) 

• 

1 - 7 Pin 18 AWG harness (Main harness) 

• 

1 - 4 Pin / 2 Wire 18 AWG harness 

(Accessories) 

• 

1 Antenna 

• 

1 Parts Bag (Hood switch, Valet switch, 

Connector, Wires) 

• 

User guide, tech bulletins. 

 

 

NOTICE:  

 
THE MANUFACTURER IS NOT 
RESPONSIBLE FOR ANY RADIO OR TV 
INTERFERENCE CAUSED BY 
UNAUTHORIZED MODIFICATIONS TO THIS 
EQUIPMENT.  SUCH MODIFICATIONS 
COULD VOID THE USER’S AUTHORITY TO 
OPERATE THE EQUIPMENT. 
 
 

INSTALLATION POINTS TO REMEMBER   
 

• 

When working on a vehicle always leave a 

window open.

 

• 

Remove courtesy light fuse if possible to 

prevent battery drain.

 

• 

Never Install control unit where it could 

interfere with normal operation or obstruct 
service technicians.

 

• 

Do not disconnect the battery on vehicles 

equipped with air bags and anti-theft radios.

 

• 

Always use a grommet when running wires 

into the engine compartment. Never run wires 
through bare or sharp metal.

 

• 

Always solder and tape all connections.

 

• 

Never ground control unit to vehicle steering 

column.

 

• 

Make sure that vehicles OEM door switch 

contacts and Parking brake system works 
properly.

 

 

 
 

 

 
 

FEATURES 

 

• 

Multi channel/button transmitter. 

• 

Dual 12-volt power lines.

 

• 

12-volt Parking lights output.

 

• 

Multi car operation (AS-1263/1264/1265 
Only)

 

• 

Factory alarm control.

 

• 

Gasoline or Diesel engine ready.

 

• 

Negative door lock output.

 

• 

Cold weather timer.

 

• 

Negative trunk output. (AS-1263/1264/1265 
Only)

 

• 

Up to 1500 feet range. (SH models only)

 

• 

Ground output. (Pulsed or constant)

 

• 

Starter kill out. (Ground when armed)

 

• 

External trigger control. (From external 
receiver. e

.g.: alarm

)

 

 
 

OPTIONS 

 

• 

Remote keyless entry

 

• 

Remote Trunk release

 

• 

Starter kill

 

• 

Flashing LED

 

• 

Pager Ready

 

• 

LIMITED LIFE WARRANTY 

 
 

PROGRAMMABLE OPTIONS 

 

• 

Door lock pulse duration (1 sec, 4 sec, or 

two ¼ sec unlock pulses). 

• 

Ignition controlled door locks. 

• 

Constant or pulsed Groundout when 

running. 

• 

Run time (4, 15, or 25 minutes) 

• 

Maximum crank duration (6, 8, or 12 

seconds). 

• 

Gasoline or Diesel engine operation. 

• 

Secure Door Lock. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание AS-1260












Отзывы: