autosen AU001, Руководство по эксплуатации

Страница: 14 / 37

14
AU004-AU010
Start programming mode of the device. (7.2)
► Object in position P1.
► Press button once 1 s.
> LED flashes (2.5 Hz).
► Object in position P2.
> Press button once 1 s.
> LED flashes (4 Hz).
> If programming is not completed
successfully, the LED does not flash and
the instrument returns to the previous
setting.
9 Hysteresefunktion P1 = P2
AU001-AU003
Start programming mode of the device. (7.1)
► Objekt auf Position P1.
► Teacheingang ca. 1 s verbinden.
> LED blinkt (2,5 Hz).
► Objekt auf Position P2.
► Teacheingang ca. 1 s verbinden.
> LED blinkt (4 Hz).
> If programming is not completed
successfully, the LED does not flash and
the instrument returns to the previous
setting.
Output response of the switching
X: Distance
Y: Comportamento dell‘uscita
①: OUT1: (switching output)
B: Blind zone
P1: Setting point 1
P2: Setting point 2
B P2 P1
Y
X
Y
X
1
2
Output response of the switching / analogue output
X: Distance
Y: Output response
①: OUT1 (switching output)
②: OUT2 (switching output / analogue output)
B: Blind zone
P1: Setting point 1 (OUT1)
P2: Setting point 2 (OUT2)
B P1/P2
Y
X
1