RF
BARCODE
SCANNING
INDEX
Autopower Corporation Copyright 2017
80 |
P a g e
Field Descriptions
Location
:
Enter the location for which the inventory will be updated.
Accept? (Y, N, E):
Enter
Y
if you are ready to update the quantities on hand with the quantities that were counted. If an
N
has been entered, the cursor will go back to the Physical Inventory menu.
Once you enter
Y
, the screen will display that the report is in progress and then display a message that
advises you to write down the spooler job number so the Inventory Value Report can be printed. The
Inventory Value Report will be in a “Paused” state in your spooler. You can then go to your print spool
er
and select the job # and print the Physical Inventory Value report. Click on Start
Settings
Printers
and Faxes
Click on the printer that has been assigned to you
Right Click on the Job # that you
wrote down
Click Restart and the report will print. This Inventory Value Report will have a heading of
Physical Inventory Value report. If you use option #9 Inventory Value Report it will print a heading of
Inventory Value Report.
Enter
E
to completely Exit from this screen.
The system will not allow
you to run this option if
exceptions still exist. All
parts must have a
quantity entered in the
NewQOH field in Enter
Physical Counts option.
Exceptions found
—
cannot post <Enter>.