WMS
BARCODE
USER
GUIDE
Autopower Corporation Copyright 2017
67 |
P a g e
Step 2:
From a terminal or PC (not RF Gun) Zero and Lock Inventory Quantity on Hand.
This step will Zero and lock the QOH
for the ENTIRE Inventory. The inventory will be “LOCKED”
so that changes cannot be made. If you must d
o a count by vendor line code use the “Cycle
Count Menu options”.
The purpose of zeroing the Inventory is to start with a clean slate. The Zero and Lock Inventory
QOH Prior to count program is used to remove the current quantities on hand from all of the
parts in the entire inventory and copy them to a file called IN-PCC on the system. If you should
look in Inventory Inquiry at this point you will see that the Before Count for all part numbers still
exist.
This option CAN ONLY BE initiated once. The system will tell you if you attempt to initiate it
again without completing all Physical Inventory steps. You will see a message that the
Location has been locked for a Physical Inventory Count if you try to initiate this option more
than once.
