8
6.
Indication of
the heater
status by the
perimeter
lighting and
by the turn
signals in the
rear-view
mirrors
6.1.
Indication of
heater startup
6.1.1 *
Off (only switching off the lighting)
6.1.2
Switch the lighting on for
1
sec
6.1.3
Switch the lighting on for 2 sec
6.1.4
Switch the lighting on for 3 sec
6.1.5
Switch the lighting on for 5 sec
6.1.6
Switch the lighting on for 7 sec
6.1.7
Switch the lighting on for 10 sec
6.2.
Indication of
command reception
from remote control
6.2.1
Off
6.2.2
*Three flashes
6.3.
Indication of
operated heater,
started by remote
control
6.3.1 *
Off
6.3.2
On
6.4.
Indication of
operated heater,
started by DIS (direct
or program start)
6.4.1 *
Off
6.4.2
On
6.5.
Indication of
operated heater,
started by additional
button
6.5.1 *
Off
6.5.2
On
6.7.
Flashing
frequency for the
indication of heater
autonomous operation
6.7.1
One flash within 3 sec
6.7.2
One flash within 5 sec
6.7.3
*
One flash within 10 sec
6.7.4
One flash within 15 sec
7.
Notifications
7.3.
Send SMS
«ALARM Trunk or
Hood»
7.3.7
*In the case when the heater has not
started or shut down during operation (i.e.
error occurred with the heater)
7.3.8
Do not send
7.4.
Send SMS
«ALARM Doors»
7.4.2
*In the case when the heater has
finished operation with no errors or when
the engine has been run during the heater
operation
7.4.8
Do not send
8.
Service
menu
8.1.
Default Settings
8.1.1
Apply factory settings
* Factory setting
Recommended settings is marked in italics
1
–RCP will turn off the heater if the battery voltage becomes lower than preset
