5
dashboard. Shorten Plug-n-Play cable by straps and fix all the cables of kit to the
dashboard. Finally connect Plug-n-Play cable to the OBD-II service connector.
Figure 2
Permanent connection
Autoplugin GSM kit is recommended to be installed permanently in the cargo area.
Detach the upholstery on left-hand side of cargo area, where fuse box is located.
Take interconnection cable and connect RCP and GSM modules together. Only
highlighted at the figure 2 connectors are used. Take permanent connection cable
and connect it to interconnection cable.
Find a place for modules behind the upholstery. RCP and GSM modules can be
joined to the packet using double-sided adhesive tape (see fig. 2). Secure packet of
modules inside the dashboard with straps. If modules are placed separately, RCP
module can be fixed with adhesive tape, and GSM module can be fixed with
straps. Pay attention that internal antenna of GSM module (marked by dashes at
figire 2) doesn’t stay close to metal parts of the dashboard. Connect LED to the
GSM module (instead of connector with single blue wire of permanent connection
cable) and fix it at the place where it will be visible this detached upholstery.
Shorten wires of permanent connection cable by place, as required. Temporary
unplug permanent connection cable from interconnection cable. Connect free ends
of permanent connection cable to the car’s wiring in accordance with table 1 and
figure 3. Use quick splice connectors for wires connection.
Plug-in permanent connection cable to interconnection cable again. Fix cables to
the car’s wiring by the straps.
Attach the upholstery back to its place.
