CHANGING THE DRIVE BELTS
Depending on usage, the drive belts (located behind the side plate) will stretch.
When this happens, in order to maintain the optimum performance of the unit, these drive
belts have to be changed.
a)
Turn the robot upside down and remove the bottom lid assembly (fig. 4a,4b,4c,4d).
b)
Inside, locate
4
screws on drive motor side, which hold the side plate in place (fig. 7a
,
7b).
c)
Take out these screws and remove the side plate
d)
Remove the drive track. Before removing the drive track, notice carefully how the drive
belts are positioned for re-assembly (fig. 7c).
e)
Take out the old drive belts and replace them with new ones.
To re-assemble, reverse steps d to a.
5
6
end hub
PVA brush
Wheel tube
CHANGING BRUSHES
Depending upon how frequently you use the
cleaner pool cleaner, it will be necessary to
replace the brushes when they are worn out.
Worn out brushes will impede cleaner’s
scrubbing, climbing the walls or general
performance.
a.
Detach one of the side plates, unscrewing the
four screws (see fig.7a ).
b.
With side plate detached, take out the wheel
tube from the machine.
c.
Open the end hub and pull out the worn PVA
brush.(see fig.6)
d.
Place the new PVA brush on to the hexagonal
tube and close it with the end hub.
e.
Reinstall the wheel tube in place and place
back the side plate screwing back the four screws.
7b
7c
7a
CAUTION:
To avoid scratches and other blemishes appearing on your robot, simply find a smooth
surface for it to rest on when cleaning the debris bag or performing minor adjustments.
These scratches
could produce changes in the robots soft and smooth edges resulting in
potential damage to some flexible pool surfaces.
smooth
surface
smooth
surface
Cleaning the pump propeller:
1) Take out the 2 (4) screws from the outlet top
2) Take out the outlet top and remove hair and
other debris around propeller
outlet top
propeller
PVA BRUSHES CARE:
This special brush material is most efficient when wet. Any discoloration is normal in the
drying process when exposed to open air. Please allow brushes to absorb pool water for
about 20 minutes before initial use or at first use of every season. You will notice that as the
brushes absorb the water and start scrubbing your pool, the discoloration will disappear.
Содержание AquaClean Robotic Cleaner
Страница 1: ...BK 0002700...
