Autonics TM-XGT, Руководство по решениям, Страница: 11 / 32

2 TM4 Communication Settings
© Copyright Reserved Autonics Co., Ltd. 11
2 TM4 Communication Settings
Devices
from the TM series do not have graphic interface; To change the devices’ settings, we need
to use the device management program from Autonics: DAQMaster.
Set the desired Modbus address thanks to the ‘Communication address’ switches, this address
1st
should be unique on the network:
Connect the TM device to DAQMaster 2nd
Please follow the procedure in annex part of this document to connect a TM device to the DAQMaster
program and have access to its parameters.
In the DAQ Master ‘Property’ window, set the parameters of the ‘Communication Setting’ group
3rd
as following:
Parameter DAQ Master
setting name Value range Note
Comm. speed Baudrate Multiple choice User setting, same than the PLC
parameter
Comm. Parity bit Parity Bit None Fixed
Comm. Stop bit Stop Bit 2 User setting
Comm. Response
waiting time Response
waiting Time 20 User setting
Comm. writing Communication
Write Enable Fixed
Device address Not available 1 to 31 User setting by switch dials, should
be unique on the network