Autonics TF31-1G, Руководство пользователя

Страница: 17 / 25

H-18
TF3 Series
Input type Decimal point Display method Temperature range (
℃
) Temperature range (
℉
)
Thermistor
(NTC)
NTC 5kΩ
1
N%H
-40 to 99 -40 to 212
0.1
N%L
-40 to -20
-19.9 to 99.9
-40 to -20
-19.9 to 99.9
100 to 212
NTC 10kΩ
1
N!H
-40 to 99 -40 to 212
0.1
N!L
-40 to -20
-19.9 to 99.9
-40 to -20
-19.9 to 99.9
100 to 212
RTD
※
1
DPt 100Ω
1
DpH
-99 to 99 -148 to 212
0.1
DpL
-99 to -20
-19.9 to 99.9
※
2
-148 to 212
※
TF3 Series displays only 3 digits. If PV decimal number of shaded temperature range is out of 3 digit, TF3 does
not display the numbers below decimal point. You can check it at the comprehensive device management program
(DAQMaster) by communicating via PC.
※ 1: Only for 1CH input model (TF31- ).
※
2: If PV with "-" sign is over 3 digits (e.g.: -99.9), the numbers below decimal point does not display.
You can check it at the comprehensive device management program (DAQMaster) by communicating via PC.
Input Type and Range
You can set the temperature to control with the , , keys.
Set range is within SV low-limit value [
LSV
] to SV high-limit value [
HSV
].
E.g.) In case of changing SV from 19 ℃ to 10 ℃
Press any key among the , , in RUN mode
to enter into SV setting mode. Last digit (10
0
digit)
on SV display part flashes.
Press the key to move digit.
(10 0 → 10¹→ 10²→10³→ 10 0 )
1 2
Press the , key to raise
or lower the set value. (9 → 0)
Press the (MODE) key to save the set value.
(If there is no additional key operations in 3 sec,
the changed SV is automatically saved.)
3 4
SV Setting
When power supplies to the unit, whole display part flashes approx. 1 sec. The display part displays model specification (no.
of input CHs, output, power supply, compressor load capacity, option function), flashes input type twice and the unit returns
to RUN mode to operate.
Model specification display is same as the unit model name. (E.g.: TF33-34A-A model)
Sensor input error Normal operation
1. Whole display part 2. Series 3. No. of input CHs/Output/Power supply
4. Compressor load capacity/
Option function
5. Run mode
Front Panel Display When Power Is On