Autonics LP-S070, Руководство пользователя, Страница: 50 / 175

3 Device Construction
50 © Copyright Reserved Autonics Co., Ltd.
[Allots decimal 100 to Mov 100 Z0: Z0 device.]
Mov D10Z0 D101: D10Z0
Therefore, the current value of D110 device is changed with the current value of D101
device.

Timer(coil)[T], Timer(current value)[T], Timer(set value)[TS]
When current value of timer is arrived at set value, it operates coil(timer).
It supports 100ms, 10ms timer.
For further details, refer to related timer instructions from ‘SmartStudio user manual’.

Counter(coil)[C], Counter(current value)[C], Counter(set value)[CS]
When current value of counter is arrived at set value, it operates coil.
For further details, refer to related counter instructions from ‘SmartStudio user manual.

Inner auxiliary device [M]
This area is allotted only for inner operation which cannot control external I/O, for example,
it receives external input and cannot execute external load.

Step device[S]

This allotted area is for controlling step such as the progress which needs the order.

Link device[L]
It is a device for linking external device, and data.
If this is not used as data link, it is available as data device or inner device.

Data device[D]
It is an allotted device for saving numeral, ASCII, etc’s data.

Pointer[*]
Pointer[*] makes device use with special method.
You can use pointer (*) to every word device as following example.
The device with pointer (*) displays same type device as the value type of the device.
In case of M100 = 123, M123 = 999, *M100 displays M123 which is M device related with
M100 value as 123.
As following mnemonic, M0 has 999 value.
MOV M123 999
MOV *M100 M0