Autonics Digipower 2000 Скачать руководство пользователя

Страница: 55 / 55

AUM-E-0506C_20150304

Major products

Distributor

www.autonics.com

Dimensions or specifications on this manual may be changed without prior notice.

Headquarters

18, Bansong-ro 513beon-gil, Haeundae-gu, Busan, Korea

Overseas Sales Dept.

#402-404, Bucheon Techno Park, 655, Pyeongcheon-ro, Wonmi-gu, Bucheon, Gyeonggi-do, Korea

Tel: 82-32-610-2730/ Fax: 82-32-329-0728 / E-mail: [email protected]

Brazil Autonics do Brasil Comercial Importadora Exportadora Ltda

Tel : 55-11-2307-8480 / Fax: 55-11-2309-7784/ E-mail: [email protected]

China Autonics electronic(Jiaxing) Corporation

Tel: 86-21-5422-5969 / Fax: 86-21-5422-5961 / E-mail: [email protected]

India Autonics Corporation - India Liaison Office

Tel : 91-22-2781-4305 / Fax : 62-21-8088-4440 / E-mail: [email protected]

Indonesia PT. Autonics Indonesia

Tel: 62-21-8088-8815 / Fax: 62-21-658 66 741 / E-mail: [email protected]

Japan Autonics Japan Corporation

Tel: 81-265-79-8570 / Fax: 81-265-79-2442 / E-mail: [email protected]

Malaysia Mal-Autonics Sensor Sdn. Bhd.

Tel : 60-3-7805-7190(Hunting) / Fax : 60-3-7805-7193 / E-mail: [email protected]

Mexico Autonics Mexico Sales Office

Tel : 52-55-5207-0019 / Fax : 52-55-1663-0712 / E-mail: [email protected]

Russia Autonics Corp. Russia Representative Office

Tel/Fax : 7-495-660-10-88 / E-mail : [email protected]

Turkey Autonics Otomasyon Ticaret Ltd. Sti.

Tel : 90-216-365-9117(9113, 9114) / Fax : 90-216-365-9112 / E-mail : [email protected]

USA Autonics USA, Inc.

Tel: 1-847-680-8160 / Fax: 1-847-680-8155 / E-mail: [email protected]

Vietnam Autonics Vietnam Representative Office

Tel : 84-8-3771-2662 / Fax: 84-8-3771-2663 / E-mail: [email protected]

• Photoelectric sensors •Fiber optic sensors •Door sensors •Door side sensors •Area sensors •Proximity sensors •Pressure sensors

• Rotary encoders •Connectors/Sockets •Temperature controllers •Temperature/Humidity transducers •SSR/Power controllers

• Counters·Timers·Panel meters •Tachometer/Pulse(Rate)meters •Display units •Sensor controllers •Switching mode power supplies

• Control switches/Lamps/Buzzers •I/O Terminal Blocks & Cables·Stepper motors/drivers/motion controllers •Graphic/Logic panels

• Field network devices·Laser marking system(Fiber, CO

, Nd:YAG) •Laser welding/soldering system

• Recorders·Indicators •Converters •Controllers·Thyristor units •Pressure transmitters •Temperature transmitters

Содержание Digipower 2000
























































Результаты поиска

Содержание Digipower 2000

Отзывы:

Похожие инструкции для Digipower 2000

Бренды по названию

Популярные бренды

Autonics Digipower 2000, Руководство пользователя

Результаты поиска

Содержание Digipower 2000

Отзывы:

Похожие инструкции для Digipower 2000

Бренды по названию

Популярные бренды