-|Transparent Guide|-
Product Components
• Product
• Mold bracket
• M3 bolt for mold bracket × 2
• Instruction manual
•
Bracket × 8
Manual
For proper use of the product, refer to the manuals and be sure to follow the safety
considerations in the manuals.
Download the manuals from the Autonics website.
Installation
■ Installing on panel
1. Set APC-1011 in panel. (panel thickness: ≤ 4 mm)
2. Set fixing brackets in slots. [Image
1]
3. Tighten fixing brackets with the M4 screw driver with the tightening torque of 0.3 to
0.5 N·m.
4. When additional fixing bracket is in need on the bottom, connect the mold bracket
on the rear of the product, before set fixing bracket. Tighten mold bracket with the
M3 screw driver with the tightening torque of 0.3 to 0.5 N·m.
[Image
1]
[Image
2]
•
When using the mold bracket, install it with the included bolts (M3 × 8 mm). If you
use a bolt out of the specification, it may result in product damage.
■ Installing with holder
You have to purchase 100 × 100 mm holder separately. Autonics does not have
dedicated holder. Fix the purchased holder to the VESA hole on the rear of the
product, using M4 Screw driver. Way to fix holder can be different by each holder.
Cautions during Use
•
Follow instructions in ‘Cautions during Use’. Otherwise, it may cause unexpected
accidents.
•
24VDCᜡ power supply should be insulated and limited voltage/current or Class 2, SELV
power supply device.
•
Install a power switch or circuit breaker in the easily accessible place for supplying or
disconnecting the power.
•
Operate the product after supplying power to the product, input/output equipment,
and load. If operate product before supplying power, it may result in output error or
malfunction.
•
Keep away from high voltage lines or power lines to prevent inductive noise. Do not use
near the equipment which generates strong magnetic force or high frequency noise.
•
Make a required space around the unit for radiation of heat, and do not block ventilation
openings.
•
Do not push the touch panel with a hard and sharp object or push the panel with
excessive force. It may result in fire or malfunction.
•
When skin is smeared with liquid crystal from the broken LCD, rinse with running water
for over 15 minutes. If it gets into the eyes, rinse eyes with running water for over 15
minutes and contact a doctor.
•
When system is down, push the power switch for 7 seconds and turn on again for
rebooting the product.
•
This unit may be used in the following environments.
- Indoors (in the environment condition rated in ‘Specifications’)
- Altitude max. 2,000 m
- Pollution degree 2
- Installation category II
Cautions during Power Wiring
•
Do not apply power before power line connection.
•
Check power polarity.
•
Use a wire with 0.75 mm
2
or more of cross section for the power and 1.25 mm
2
or
more of cross section for the ground.
•
Use round cramp terminal with 3 mm or more of internal diameter and 6 mm or less
of external diameter.
•
Tighten the terminal screw with 0.5 to 0.8 N·m torque.
•
Ground the product separately from other devices and resistance should be less
than 100 Ω.
Software
You can download and use software programs for Autonics products in APC-1011.
There are two ways for downloading software.
•
Moving the installation file from a PC, using a USB driver
•
Downloading the installation file from the Autonics website after connecting the LAN
cable to the Ethernet port of APC-1011
Please refer to the catalogue or user manual for detailed information about software
programs for APC-1011.
Model
APC-1011
Screen size
10.1 inch
LCD
type
IPS TFT Color LCD
Resolution
WXGA 1280 × 800 pixel
Contrast
16:10
Display area
216.96 × 135.6 mm
Display color
16,777,216 color
LCD
view angle
(top/bottom/left/right)
Within 85° of each
Backlight
White LED
Backlight
MTBF
50,000 hrs (LED Backlighting)
Luminance
350 cd/m
2
Touch
Resistive type
CPU
Integrated Intel J3160/1.6 GHz Quad core processor, TDP 6 W
OS
Windows 10 IoT Enterprise Entry (64 bit)
Hard disk
mSATA 64 GB SSD
System memory
DDR3L 4 GB
Indicator
Power indicator (green)
Speacker
Stereo speaker 2 W + 2 W
Watch dog timer
Watch dog timer (1 to 255 seconds, software setting)
Battery life cycle
5 years at 25℃
Real-time controller
RTC embedded
Language
Korean, English
Approval
ᜢ ᜣ
Unit weight (packaged)
≈ 1.6 kg (≈ 2 kg)
Specifications
Power supply
24 VDCᜡ
Alloable voltage range
90 to 110 % of power supply
Power consumption
≤ 30 W
Insulation resistance
≥ 100 MΩ (500 VDCᜡ megger)
Ground
3rd ground (≤ 100 Ω)
Noise immunity
±0.5 kV square wave noise (pulse width: 1 ㎲) by the noise simulator
Dielectric strength
500 VACᜠ 50/60 Hz for 1 minute
Vibration
0.75 mm double amplitude at frequency of 10 to 55Hz (for 1 minute)
in each X, Y, Z direction for 1 hour
Vibration (malfunction)
0.5 mm double amplitude at frequency of 10 to 55Hz (for 1 minute) in
each X, Y, Z direction for 10 minutes
Shock
300 m/s² (≈ 30 G) in each X, Y, Z direction
Shock (malfunction)
100 m/s² (≈ 10 G) in each X, Y, Z direction
Ambient temperature
0 to 50 ℃, storage: -20 to 60 ℃ (no freezing or condensation)
Ambient humidity
35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation)
Protection structure
IP65 (front panel, IEC standard)
Serial interface
1 RS232C / RS422 / RS485 × 1 (jumper pin setting)
USB interface
USB 3.0 HOST × 1, USB 2.0 HOST × 2
Ethernet interface
Gigabit Ethernet × 2 (10/100/1000Base-T)
HDMI
interface
1
VGA
1
Audio
1
①
②
⑤
④
⑥
⑬
⑭
⑪
⑩
⑦⑧⑨
③
⑫
No.
Description
①
Power indicator (green)
②
LCD screen
③
HDMI
④
VGA
⑤
USB 2.0
⑥
Ethernet
⑦
USB 3.0
⑧
Audio
⑨
RS232C / RS485 / RS422
(jumper pin setting)
⑩
Power switch
⑪
Power terminal
⑫
Fixing bracket mounting slot
⑬
Mold bracket mounting slot
⑭
VESA hole
Unit Descriptions
