Automationdirect.com Stellar SR44, Руководство пользователя

Страница: 215 / 238

A–21
A.2.2 – Changing the Parameter Group After the Unit Has Passed Top of Ramp (continued)
(continued from previous page)
8. With ‘0 Parameter’ shown on the display, press the
쑿
button until ‘8 Parameter’ is displayed.
9. Press ENTER once to accept the change.
10. Press # once to return to ‘P97 U1 I/P srce’.
11. Press the
쑼
button once until ‘P98 U1 I/P Mask’ is shown at the top of the display.
12. Press ENTER to select ‘P98 U1 I/P Mask’.
13. Press the
쑼
button once to change the bit state of bit 0 to zero (0).
14. Press the OPTIMISE button three times so that the cursor is displayed on bit 3.
15. Press the
쑿
button once to change the bit state of bit 3 to one (1).
16. Press ENTER once to confirm the changes.
17. Press # once to return to ‘P98 U1 I/P Mask’.
(continued next page)
10 9
11
12
13
14 15
16
7
#
8
#
29
17
(continued from
previous page)
(continued next page)
(press button multiple times, or hold to scroll)
Appendix A: Setup Examples
SR44 Series Soft Starter User Manual
1st Ed, Rev B 07/31/2019