Touch Screen Driver Installation for
Windows 98
Required items to
know
or
have
to install the Touch Driver.
What Operating System you are using.
Windows 98
What Serial Port you are connected to.
Usually COM 1 or COM 2
The type of touch screen.
Smartset
The CD-ROM or Floppy disk included with the system.
Touch Screen Driver Installation for Windows 98
Insert the provided CD
Select Link to the Windows 98 driver
Select
Open
from the Windows dialog box.
Select
SmartSet
Controller for Com1 or Com2
Remove the CD.
Restart the computer; you will be prompted to calibrate the touch screen.
Touch each of the 3 targets as directed. If the unit does not respond to
your calibration touches then you have probably selected the wrong
COM port. If so, reinstall the driver and selecting the correct COM port.
You are now ready to use your touch screen.
Note 1:
The touch screen calibration information is maintained in the computer. If you
change computers, you will need to reinstall the touch screen driver software and
recalibrate.
Note 2:
If for any reason the touch screen performance is unsatisfactory, you can
recalibrate at any time. This is done from the ELO icon under the Windows control panel
Содержание FPM-180
Страница 2: ...FPM 180 FPM 180 TS LCD Monitor User Guide Revised 12 02...
Страница 22: ...Appendix G Mounting Dimentions...
Страница 23: ......
Страница 24: ...NOTES Model Number _________________ Serial Number _________________...
