p. 4
/11
TL2-QSG-EN-03
4.4. GENERAL VIEW
4:3
4:1
4:2
4:4
4:8
4:5
4:11
4:7
4:12
4:10
4:6
4:9
A
Fig. 1 - Location of components
Ref.: Designation:
Ref.: Designation:
4:1
Painted steel box.
4: 7
Electrical circuit board, left
(Power supply)
.
4: 2
Aluminum front end box (A).
4: 8
Functional pictogram
(Option)
.
4: 3
Aluminum rear end box (B).
4: 9
Fixings provided by dowels.
4: 4
Top cover in brushed stainless steel.
4: 10 Lock.
4: 5
Drive assembly.
4: 11 Non-contact reader installed under
protection screen
(option)
.
4: 6
Stainless steel fixed arm
4: 12 Electrical circuit board, right
(control logic)
.
As a convention and a general rule, the user will be considered to be in direction "A" when the tripod is
on his right side, and in direction "B" when the tripod is on his left side.
4.5. LOCATION OF THE ELECTRICAL COMPONENTS
4:16
4:21
4:15
4:18
4:17
4:19
4:20
4:22
Ref.: Designation:
04:15 Support for electronic devices
04:16 DIN rail
04:17 Power supply 24 VDC - 4 A
04:18 Main switch:
If you open the
casing, turn off the equipment
by switching off the main
switch.
04:19 Earth terminal
04:20 Terminal block stop.
04:21 Protective film.
04:22 Motor control board (option)
Fig. 2 - Electrical PC board, left
The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using this information for any purpose
other than the use of the products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic
Systems. The document is subject to change without notice
.
