Automatic Products Showcase 748, Руководство по эксплуатации

Страница: 60 / 107

APi 748 V1.1 406 4.10 P/N 77500001
Back
ERROR MESSAGES
Error Message Error Description Possible Cause and Solution
CDT BD NO COMM Credit Module lost Serial
communication with the 748
controller Check plugs and harnessing.
Check for power.
Replace Credit Module.
TRT BD NO COMM Refrigeration/Turret Module
lost Serial communication with
the 748 controller Check plugs and harnessing.
Check for power.
Replace Refrigeration/Turret Module.
KPD BD NO COMM Message Center lost Serial
communication with the 748
controller Check Credit Module indicator LEDs.
If abnormal, troubleshoot Credit
Module first.
Check plugs and harnessing.
Replace Message Center.
PRC BD NO COMM Column Price display lost
communication with the 748
controller Check plugs and harnessing.
Replace top Price display Board.
CM NO COMM No communication with the
coin mech Recycle power.
Check plugs and harnessing.
Check for correct cash system type
setup.
Replace Coin Mech.
Replace Credit Module.
CM TUBE FAULT Defective coin tube sensor Re-seat coin magazine.
Replace Coin Mech.
CM COIN JAM Coin lodged in coin mech Check Coin Mech for jam.
Clean Coin Mech.
Replace Coin Mech.
HEALTH TIME OUT Food compartment
temperature exceeded
maximum health temperature
for more than 15 History Temporary loss of power or loss of
Serial communication to Turret
minutes Module. Check Logs.
Refrigeration Unit not plugged in.
Dirty filter screen.
Dirty condenser.
Machine too close to the wall.
Main door latch adjustment too loose.
Excessively high ambient temperature.
Faulty Temp Sensor.
Faulty Refrigeration/Turret
Module. Replace.
Faulty Refrigeration Unit.
BAD TEMP PROBE Temperature reading from the
sensor is out of normal range
Check plugs and harnessing.
Replace temperature sensor.
Replace Refrigeration/Turret Module.