manualshive.com logo in svg

Automatic Products Showcase 748, Руководство по эксплуатации

Поделиться
Скачать
Automatic Products Showcase 748 Скачать руководство пользователя страница 37

 

 

APi 748 V1.1 406 

3.20 

P/N 77500001 

 

Back 

“Cash System Type DUMB MECH”

 

 

DUMB MECH CASH SYSTEM OPTIONS 
Coin Mech – 

If the coin mech is connected, set to 

YES; otherwise, set to NO. 
 
DISPLAY: 

“COIN MECH YES” 

 
Key Function 
[1] Toggles between YES and NO 
[5] Saves choice and proceeds to the next option 
[6] Proceeds to the next option without saving 
[0] Saves choice and returns to the top of the 
service mode 
[RESET] Returns to the top of the service mode 
without saving 

 
Tube Sensing – 

The Tube Sensing option 

determines how the 748 will keep track of coin 
changer tube coin counts. Coin tube counts are 
changed as coins are deposited and dispensed 
from the coin changer. 
 
Setting this option to COUNT will cause the 748 to 
ignore the coin tube level sensors in the coin 
changer. 
 
Setting this option to LEVEL will cause the tube 
counts to be adjusted based on the coin tube level 
sensors. If a coin tube count is greater than 4 and 
that tube sensor uncovers, the count will be 
adjusted to 4. Similarly, if a coin tube count is less 
than 4 and that tube sensor is covered, the count 
is set to 4. 
 
NOTE: Some coin changers will not dispense a 
coin even when commanded to do so. In this 
case, the tube counts in the 748 will become 
corrupt and a customer may get short changed.  
Before using the COUNT Tube Sensing option, be 
sure the coin changer will operate its dispensing 
mechanism regardless of the number of coins in 
the tube, especially when the tube is almost 
empty. 
 
DISPLAY: 

“TUBE SENSING LEVEL”

 

 
[1] Toggles between LEVEL and COUNT 
[5] Saves choice and proceeds to the next option 
[6] Proceeds to the next option without saving 
[0] Saves choice and returns to the top of the 
service mode 
[RESET] Returns to the top of the service mode 
without saving 
 

 
 

 
Card Reader – 

If card reader is connected, set to 

YES; otherwise, set to NO. 
 
DISPLAY: 

“CARD READER NO”

 

 
[1] Toggles between YES and NO 
[5] Saves choice and proceeds to the next option 
[6] Proceeds to the next option without saving 
[0] Saves choice and returns to the top of the 
service mode 
[RESET] Returns to the top of the service mode 
without saving 
 
 

Bill Validator – 

If Bill Validator is connected, set 

to YES; otherwise, set to NO. 
 
DISPLAY:

 “BILL VALIDATOR YES” 

 
[1] Toggles between YES and NO 
[5] Save choices and proceeds to the next option 
[6] Proceeds to the next option without saving 
[0] Saves choice and returns to the top of the 
service mode 
[RESET] Returns to the top of the service mode 
without saving 
 

Decimal Point Position – 

This option is only valid 

when a coin changer is not configured. The coin 
changer determines the price multiple and 
decimal point position. When a coin changer is not 
configured, this option will allow setting of the 
decimal point position. 
 
DISPLAY: 

“DECIMAL PT POS .00”

 

 
[1] Scrolls the decimal point forward through the 
available positions 
[2] Scrolls the decimal point backwards through 
the available positions 
[5] Saves choice and proceeds to the next option 
[6] Proceeds to the next option without saving 
[0] Saves choice and returns to the top of the 
service mode 
[RESET] Returns to the top of the service mode 
without saving 
 
 

Содержание Showcase 748












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды