manualshive.com logo in svg

Automatic Products Showcase 748, Руководство по эксплуатации

Поделиться
Скачать
Automatic Products Showcase 748 Скачать руководство пользователя страница 30

 

 

APi 748 V1.1 406 

3.13 

P/N 77500001 

 

Back 

Pressing the [4] Key from “Service” 

the display will prompt “History”

 

 
KEY [4] 
History 

– This menu contains the Machine 

History Log, Error Log, and Temperature Logs. 
The operator may view, clear, or print logs from 
this menu. Each function in this service menu 
requires a two-key entry to run; the first key is [4], 
and the second key is one of the following: 
 
[1] View the History log 
[2] View the Error log 
[3] View the Temperature log 
[4] Not used 
[5] Clear the History log 
[6] Clear the Error log 
[7] Clear the Temperature log 
[8] Not used 
[9] Print a selected log 
[0] Not used 

 
View History Log [4][1] 

This feature allows the operator to view the last 50 
events in the History Log. 
 
DISPLAY: 

“xx = logged event” 

 
xx is the event number 
logged event is the event 
 
[1] Scrolls forward through History Log 
[2] Scrolls backward through History Log 
[3] Toggles between event and time/date of the 
event 
[RESET] Returns to the top of the service mode 

 
History Log Detailed 

When the log is displayed on the Message 
Center, the most recent event recorded will be 
displayed.  If the log is full, the log entry number 
will be 49; otherwise, the log entry number will be 
the same as the number of entries in the log. As 
more entries are recorded, the oldest entries are 
discarded so only the most recent 50 remain in 
the log. 
 
When the History Log is displayed, it requires two 
lines on the display. The first line shows the log 
number and the event, and the second line shows 
the time and date it was logged. 
 
Example of history log entry displayed: 

6 = POWER UP TIME 

Push key [3] to display line 2: 

6 = 8.05AM 1-05-01 

 

Example history log printout: (see 4-9) 

 

AUTOMATIC PRODUCTS 

748 VER xx.xx 

- - - - - - - - - - - - - - - - - - - - - 

HISTORY LOG 

11:46 FRI 01-05-2001 

- - - - - - - - - - - - - - - - - - - - - 

8:37AM 1-02-01 DEFAULTS LOADED 
10:36AM 1-02-01 POWER DOWN TIME 
10:41AM 1-02-01 POWER UP TIME 
12:42PM 1-02-01 MAIN DOOR OPEN 
12:45PM 1-02-01 MAIN DOOR CLOSE 
4:23PM 1-04-01 POWER DOWN TIME 
8:05AM 1-05-01 POWER UP TIME 

 
Error Log [4][2] 

This log contains a list of errors the machine has 
detected. This log includes the last 20 errors. 

 
DISPLAY: 

“xx = logged error” 

 
xx is the event number 

 
[1] Scrolls forward through Error Log 
[2] Scrolls backward through Error Log 
[3] Toggles between error and time/date the error 
occurred 
[RESET] Returns to the top of the service mode 
 

Error Log Detailed 

When the log is displayed on the Message Center, the 
most recent error recorded will be displayed.  If the log 
is full, the log entry number will be 19, otherwise the 
log entry number will be the same as the number of 
entries in the log. As more entries are recorded, the 
oldest entries are discarded so only the most recent 
20 remain in the log. 
 
When the error log is displayed, it requires two lines 
on the display. The first line shows the log number 
and the error, and the second line shows the time and 
date it was logged. 

 
Example of error log entry displayed: 

1 = HEALTH TIME OUT 

Push key [3] to display line 2: 

1 = 10.36AM 1-02-01 

 
Example error log printout: (see 4-9 to print) 

 
 
 

AUTOMATIC PRODUCTS  

748 VER xx.xx 

- - - - - - - - - - - - - - - - - - - - - 

ERROR LOG 

11:46 FRI 01-05-2001 

- - - - - - - - - - - - - - - - - - - - - 

8:37AM 1-02-01 MAIN DOOR OPEN 
10:36AM 1-02-01 HEALTH TIME OUT 

Содержание Showcase 748












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды