13
Toll Free: 1300-350-635 www.catevolution.com.au Aust & NZ
the 8-Hour Sleep Mode period, the yellow LED will flash on
then off to indicate you have exited this mode.
3.
Empty [Wait Time Setting]
Press and Release: Empties all litter from Globe into Waste
Drawer. Press any button to return the Globe to Home
Position.
Press and Hold: Enters Wait Time Setting mode. The Wait
Time is the elapsed time starting from when your cat exits
the unit to when the unit runs a clean cycle.
It may be useful to reduce the Wait Time to minimize odor
and/or the time waste is available to pets, such as dogs.
Remember to allow enough time for the litter to clump
(lower quality litter may take longer to set up).
Press and hold the Empty button until you see one of the
lights flash. The color of the light indicates the current Wait
Time Setting:
Blue
3 minutes
Yellow
7 minutes
Red
15 minutes
Use the Reset button to toggle to the next setting and save
your selection by pressing and holding the Empty button for
about five seconds.
