Assembly
1.Fitting the welding screen
1.Place the welding glass (A) over it in the frame
for welding screen(B).
2.
Insert the handle welding mask hole.
2.Fitting the wire spool
1
Wire types
Various welding wires are required for different
applications. The welding set can be used with
welding wires with a diameter of 0.9 mm. The
appropriate feed rollers and contact tubes are
supplied with the set. The feed roller, contact
tube and wire cross-section must always match
each other.
2
Wire spool capacity
Wire spools with a maximum weight of 0.45 kg
can be fitted in the welding set.
3
Inserting the wire spool
1.Unlock the housing cover by turning the
fastening screw through 90
°
and flip open the
cover.
2.Check that the windings on the spool do not
overlap so as to ensure that the wire can be
unwound evenly.
3.Place the wire spool on the spool holder .
Ensure that the end of the welding wire is
unwound on the side of the wire guide, see
arrow.
4 Inserting the welding wire and adjusting the
wire guide
1.Pull the pressure roller spring and swing it
upward.
2.Pull the pressure roller holder(E) downwards .
MIG100/MIG130 09