AUTOHELM ST4000+, Руководство по обслуживанию

Страница: 29 / 34

Chapter 5. Tiller Drive Actuator GP
Autopilots Service Manual 83115-1 25
Chapter 5. Tiller Drive Actuator GP
5.1 Tiller Drive Actuator GP test
Carry out the passive and active tests detailed in Figure 15. Tiller Drive Actuator
GP test flowchart.
D2398-1
Fuse/CB
12A
1
2
3
Blue Brown
Actuator deck plug
PSU
12V 15A
Switch
Blue
Brown
Figure 14. Tiller Drive Actuator GP test connections
Change damaged
components
Check gears,
thrust rod,
actuator body,
motor
Start
No
Yes
Visually inspect unit
Extend and retract
thrust arm by hand
No
Yes
OK
OK
Check resistance across
motor connector pins 2 and 3
is approximately 1 to 2 ohms
Change
as necessary
No
Yes
Check wiring
and connector
OK
Check motor
Change as
necessary
OK
Switch on,
check thrust rod moves and
current less than 2A
Connect power supply
as in Figure 10.
OK
No
Yes
Change
as necessary
Switch on.
Check thrust rod moves
in opposite direction
to that of first test and
current less than 2A
No
Yes
OK
Actuator OK.
End of test
D3731-1
No
Yes
Check gears,
thrust rod,
actuator body,
motor
Check gears,
thrust rod,
actuator body,
motor
Change
as necessary
Switch off.
Reverse connections to PSU
Figure 15. Tiller Drive Actuator GP test flowchart
All manuals and user guides at all-guides.com