Travel connection:
Travel can choose machinery or dry reed board travel.
PUBLIC connect to -, direction wires connect to
Motor connection:
Motor must installed according to the following diagram,
motor GND line connect to COM on the circuit board, or will cause the problem of
motor single direction operation.
Setting of Red DIP switch on control boa
DIP 1 switch : Single key circulation function
Turn on DIP1 switch to OFF,
Turn on DIP1 to ON=single key circulation,
perform circulation action .For example:
press open again=door stop,
again=
door open, circulate in this way.
DIP 2 switch : OFF For push switch ( com & one)
DIP 3 switch : Auto close function
Travel can choose machinery or dry reed board travel.
, direction wires connect to
C.L
and
O.L
.
Motor must installed according to the following diagram,
motor GND line connect to COM on the circuit board, or will cause the problem of
motor single direction operation.
Setting of Red DIP switch on control board:
DIP 1 switch : Single key circulation function
open close
stop
keys control individually.
Turn on DIP1 to ON=single key circulation, that is with which key to study, this key will
.For example: use
open to study ,press open = door open,
again=door stop, press open once more=door close, press
e in this way. Use single key control function.
For push switch ( com & one)
Auto close function
motor GND line connect to COM on the circuit board, or will cause the problem of
keys control individually.
this key will
= door open,
press open
