Autodesk 46304-050008-1600A - Vault R4 Essentials Aotc, Руководство по внедрению, Страница: 98 / 140

Configure Firewalls
Before adding a workgroup be sure that the SQL server can communicate with
the Vault server through the firewall. This can be done by allowing an
exception for the SQL executables sqlbrowser.exe and sqlserver.exe.
Configure Subscribers
After the Publishing server is set up and configured the subscribing servers
can be setup. When configuring the subscribing servers the publishing server
will install the Vault server databases to the subscribing server over the
network.
NOTE For subscribing locations with slower network connections it is advantageous
to configure the server at the same location as the publishe r and ship the server.
If shipping a subscribing server to a different location, it should not be disconnected
from the network for more than 14 days to allow a successful replication once
reconnected to the network.
1 Install the same version of SQL that was used on the publisher with a
preconfigured instance named AutodeskVault the same sa password as
the publisher.
2 From the publisher launch the Vault server console.
3 In the left pane of the server console,right-click on the Workgroups node
and select Add Workgroup.
92 | Chapter 8 Configure Vault Collaboration and Vault Professional