Autodesk 46304-050008-1600A - Vault R4 Essentials Aotc, Руководство по внедрению

Страница: 63 / 140

2 Test the backup by restoring it to another computer.
3 If you have not upgraded your MS SQL database you need to make sure
that the MS SQL is upgraded to 2005 SP3 or 2008 SP1.
4 Run the Vault server 2011 installation and allow it to upgrade your
existing Vault server.
If you are running the Autodesk Vault server 2008, remove the data
management server components before installing the Vault server 2011.
These steps are required to remove Autodesk Vault server 2008. Always create
a backup of your vault data before uninstalling. Be careful to perform the
following steps in the order given.
Uninstall Components
Before uninstalling any components, back up existing vault and library data.
Restore the backed up data on a test environment to verify that it can be
successfully restored before proceeding.
NOTE Depending on your configuration, you may not find some of the following
components. If they do not appear in the Windows Add or Remove Programs
utility, skip the item.
■ Autodesk Vault server 2008 or earlier
■ Autodesk Vault 2008 or earlier (if the server and clients are on the same
computer)
■ Autodesk Office Add-in (if the server and clients are on the same computer)
NOTE Do NOT uninstall the SQL instance AUTODESKVAULT.
Install Vault Server 2011
You can install Autodesk Vault server 2011 after you:
■ Back up the vault and library data.
■ Restore the backup on a test environment to verify it works.
Install Vault Server 2011 | 57