AutoDAB Connect User Guide
4
Installation Procedure
1. Please read the installation procedure carefully prior to the actual installation.
Consult a professional installer if you have any issues or concerns with the
installation.
ATTENTION
1. We recommend that if you are going to use the cigarette lighter as
the power source for AutoDAB Connect, the lighter socket needs to
connect to the ignition.
2. Otherwise, you may have the following condition, after the car engine
is turned off:
AutoDAB Connect will continue to draw minimal power from the
battery.
For many intelligent new cars, AutoDAB Connect may be detected
as device not disconnected.
The car radio and AutoDAB Connect may become out of sync
when you resume listening. In this case, please read the
troubleshooting section for the solution.
2. Select a location to mount your AutoDAB Connect. For the best performance, please
locate it in the middle and under the car
’s glove compartment. For other locations,
please store it away from metal objects and in an open area.
3. Mount your AutoDAB Connect with the bottom cover up and the cables and
connectors to the back.
4. Secure the AutoDAB Connect with the supplied dual lock tapes and screws. Please
refer to the section on
Securing AutoDAB Connect, Step by Step
.
5. Install your DAB antenna; please refer to your DAB antenna installation guide for
installation instruction.
Содержание Connect
Страница 1: ...AutoDAB Connect In Car DAB Adapter User Guide www AutoDAB com ...
Страница 32: ...AutoDAB Connect_ 201501 ...