AutoDab Connect, Руководство пользователя

Страница: 19 / 32

AutoDAB Connect User Guide
17
from 1 to 3 and Frequency is the auto scanned frequency. Stay at the frequency
you prefer, which will be the new FM frequency for transmitting.
3. Press the Rotary Knob or after a 10 seconds timeout, the FM transmitter will set
and transmit FM signal at the new frequency. Now you can listen to DAB stations
via this FM frequency.
Operating on Car Radio
1. Manually change your car radio
’s FM frequency to match the new AutoDAB
Connect transmitting frequency setup.
To Set FM Transmitting Frequency Manually
If you wish to change the setting and use your own selected FM transmitting frequency
manually, do the following:
1. Press LINK , and the screen will show the current FM Transmitting Frequency
《
Frequency
》
.
2. Then you can accelerate rotating the Rotary Knob [
◄] [►] to
step up or down
FM frequency by 2MHz, or just rotate the Rotary Knob [
◄] [►] to
step up or
down FM frequency by 100KHz, to choose a frequency until the desired FM
frequency is displayed (e.g. 106.7MHz). Make a note of that frequency number.
3. Press the Rotary Knob or after 10 seconds timeout, the AutoDAB Connect will
set and transmit FM signal at this new frequency and the screen will show
《
TO
Frequency
》
.
4. Press FM preset of your car radio corresponding to the same frequency from step
2 if you have previously saved for DAB reception. Otherwise, tune the car radio to
the same FM frequency.
5. Now you can listen to DAB stations via this new FM Frequency.
Note:
It is recommended to set the selected FM frequency as one of the memory
presets of your car radio, selecting this particular preset FM frequency
together with setting the A
utoDAB Connect’s FM transmitting frequency will
quickly enable you to start listening to DAB stations.
To Save a Desired FM Transmitting Frequency in Memory
As unused FM frequency may vary from one area to another, it is suggested to save a
few frequencies (up to 4 frequencies) in AutoDAB Connect so that you can switch to a
new FM transmitting frequency instantly when you drive into an area where the original
FM frequency for DAB is no longer available.
1. Press LINK , and the screen will show the current FM Transmitting Frequency
《
Frequency
》
.
2. Then you can rotate the Rotary Knob [
◄] [►]
to step up or down FM frequency
by 100KHz, to choose a frequency, and the screen will show
《
Frequency
》